Ensure the input selected corresponds to the input port being used.The LCD has two possible connection methods, using either the HD-15 cable or the DVI-D cable.Wiggle the cable where it connects to the LCD panel.Reset the LCD to the factory default settings.If the issue is that the fonts and text are distorted or blocky, it may be necessary to adjust the pitch and phase settings of the monitor.Moving such devices away from the monitor will minimize the affects of EMI. The display elements in both Cathode Ray Tube (CRT) and Liquid Crystal Display (LCD) monitors use precisely calibrated components that can be adversely affected by EMI. NOTE: Electrical devices and florescent lighting produce an invisible field of electromagnetism that cause an effect called Electromagnetic Interference (EMI). Turn off any florescent lighting in the vicinity of the computer.Remove any devices connected to the same wall outlet or electrical circuit as the monitor.Remove any magnetic devices, electrical devices, speakers, lamps or fans from the vicinity of the computer.Contact the manufacturer of the power strip or surge protector device for further assistance. NOTE: If this eliminates the display issues then the problem lies with the power strip or surge protector. If using the AC adapter, disconnect the AC adapter from any power strip or surge protector and connect it directly into a wall outlet.If the monitor accepts more than one input source, press the INPUT button on the monitor to cycle through input modes.Ensure the monitor cables are correctly connected.The DT LCD Shade is made of a durable carbon-fiber composite material that is light and flexible has been tested down to -20º C (-4º F) for several hours (we expect that it would perform well at lower temperatures, but have no capacity to do real-world testing below that temperature) and up to 70º C (160º F).NOTE: Because each of these steps can be a possible resolution for display issues, check the display function after completing each step. Contax 645 with Standard 90º Viewfinderįor testing on other bodies please contact us.Phase One XF with + Standard (90º) Viewfinder.Contax 645 with Waist Level Viewfinder (but not the Standard 90º Finder).Phase One XF with Waist Level Viewfinder (but not the Standard 90º Finder).Tech camera bodies such as those from Arca Swiss, Cambo, and the Phase One XT.It has tested with and is compatible with: The DT LCD Shade is compatible with any body that does not physically block its attachment. All mounts (Hasselblad H, Hasselblad V, Contax 645, and Phase One / Mamiya) are compatible. The DT LCD Shade for the Phase One IQ is compatible with all IQ1, IQ2, and IQ3, and IQ4 series digital backs. And don’t worry, in this storage configuration it safely clears (and so does not interact with) the safety release for the digital back!īest yet, the DT LCD Shade is made of a flexing carbon fiber composite material so it is strong and durable, but feather light (~1 ounce). When you’re done with your shoot the DT LCD Shade can be slid onto the IQ backwards, meaning it doesn’t take up any extra space in your pack. In either orientation it does not block access to any port or button on the Phase One IQ you can continue to use the silver hard buttons and touchscreen on the back, and plug in cables to all ports on the side. Low Angle Viewing: with the longer edge at the bottom, such that it can be seen from a higher angle.Standard Viewing: with the longer edge at the top, to block light from the sky and overhead lights.It is so precisely designed that it snaps firmly onto the back by friction alone, and holds solidly there is no need for any adhesives or to lock/unlock it. The DT LCD Shade for the Phase One IQ reduces glare and reflections on the touch screen of any Phase One IQ series back. USB, Ethernet, FireWire, and HDMI Cables for Phase One and Mamiya (13).Certified Pre-Owned Phase One Bodies (2).Certified Pre-Owned Phase One Lenses (10).Certified Pre-Owned Phase One Digital Backs (9).Certified Pre-Owned Phase One Backs, Bodies, and Lenses (21).Phase One Backs, Bodies and Lenses (28).
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |